Contents
At a glanceSide-by-side comparisonHow each one looksFittingBrightness and colourCost and long-term useOur verdictFAQsYour worktops are in shadow and you want lights under the wall cupboards. Then you find two very different options. Flexible LED strip that you cut to length, or rigid light bars that click together. Both put light on the worktop. They differ in how they look, how they fit and how easy they are to live with. Neither is wrong.
LED strip is cheap and flexible, and can give an unbroken line of light. Under cabinet bars come in set lengths with the diffuser built in, so they look tidy straight out of the box. This guide compares the two for a typical UK kitchen, so you can pick the right one for your cupboards and budget. We also cover the cost of each once all the extra parts are included.
At a glance
Side-by-side comparison
| Feature | LED strip | Under cabinet light bars |
|---|---|---|
| Best for | Long, continuous runs and odd shapes | Quick, tidy fitting in standard kitchens |
| Look | Unbroken line, best in a channel | Neat bars with built-in diffuser |
| Visible dots | Possible without a diffuser | Rare, diffuser hides LEDs |
| Cutting to length | Cut at marked points | Fixed lengths, linked together |
| Fitting effort | More planning and fiddly joins | Screw or stick up and link |
| Heat handling | Needs a channel in long runs | Housing helps spread heat |
| Colour options | Wide, including RGB | Mostly white, some tunable |
| Cost | Lower per metre | Higher per metre |
How each one looks
LED strip gives a continuous line of light. Inside an aluminium channel with a frosted cover, it looks sleek and built in. Without a channel, the individual dots can reflect in a glossy worktop, which looks cheap. Light bars come with a diffuser already fitted, so they look tidy straight away. There may be small gaps between bars, but under a cupboard lip you will rarely see them. Check under the cupboard for a lip.
Fitting
Bars are easier for most people. You fix them under the cupboard, link them with short leads and plug them in. LED strip takes more planning. You need to measure, cut at the marked points, add connectors at corners and fit the channel. It is not difficult, but it is fiddly. If you enjoy DIY and want a perfect finish, strip rewards the effort. Do a test run before sticking anything.
Brightness and colour
Both can be bright enough for prep. Bars usually state their lumen output clearly. Strip brightness depends on the LED density and type. For a kitchen, choose neutral white around 4000K or warm white around 3000K to match your other lights. Strip offers more colour options, including RGB, which can be fun in a kitchen diner but is rarely needed over a worktop. Match the colour to your ceiling lights.
Cost and long-term use
LED strip is cheaper per metre, especially for long runs. Add the cost of channels and connectors, though, and the gap narrows. Bars cost more but include their housings. If one bar fails, you swap that bar. If a strip fails, you may need to replace a section and re-make the joins. Both should last many years if they are kept cool. Add up the full parts list before you compare prices.
Our verdict
Choose under cabinet bars if you want a quick, tidy job with little fuss. They suit most standard kitchens and look neat without extra parts.
Choose LED strip if you have long or unusual runs, want an unbroken line of light, or like the idea of colour options. Fit it in an aluminium channel with a diffuser. That one step makes the biggest difference to how it looks.
Shop the range
Frequently asked questions
Do I need a channel for LED strip under cupboards?
It is strongly recommended. A channel hides the dots, protects the strip from grease and helps it stay cool. It also gives the strip a straight, firm base, so it does not sag or peel over time.
Which is brighter, LED strip or light bars?
It depends on the product. A high-density strip can be just as bright as a bar. Compare the lumens per metre or per bar on the listing. For worktops, aim for around 250 to 400 lumens per 30cm.
Can I fit under cabinet lights without an electrician?
Yes, if you use a plug-in kit or rechargeable lights. Hard-wired lights connected to the lighting circuit should be fitted by an electrician. A plug-in kit run from a socket inside a cupboard is a neat compromise.
Can I link several bars to one switch?
Most bar kits are designed to link and run from one power supply and switch. Check the maximum number of bars per supply. LED strip runs can also share one switch, as long as the power supply is big enough.





